Największy producent wozów asenizacyjnych w Polsce

  • pl
  • en
  • de
  • ru

Znajdź produkt

With water gun – PN-60/4

With water gun – PN-60/4

THIS TYPE OF TANKER IS AVAILABLE WITH CAPACITIES FROM 6 000 TO 14 000 LITRES.

CHASSIS

Slurry tanker PN-60/4 is designed as self-supporting tank, mounted on a double-axle sprung chassis.

TANK

A steel, hot galvanised tank with central frame has internal strengthening rings and baffles. Opened rear head with two connection pipes. 3” sight-glasses are mounted on the front head and connection pipes for valves on sides of the tank. A Ø 200 mm hatch and overflow safety device are placed in the upper part of the tank.

COMPRESSOR

JULIA pumping unit (compressor coupled with impeller pump) is mounted on the drawbar.

GATE VALVES

A hydraulically controlled 5” gate valve with a spreading spoon and manual gate valve are mounted on the rear head. A 2" connection pipe is mounted on the bottom of the tank, allowing to connect an additional discharge hose, e.g., for crops watering. A three-way valve on the front head allows redirecting the liquid stream from the pump onto the gun or onto the ball valve with a 2” fire hose connection.

OPERATION

Tank filling is achieved by vacuum, made in the tank by the compressor, driven by a PTO shaft from the tractor. Tank emptying is done by overpressure or with the impeller pump, switched by the gear lever to reverse rotation.

SPREADING SYSTEM

Sprinkling can be done in two ways:
a) by the compressor – through the bottom spreading spoon
b) by the impeller pump – through the gun or through the fire hose attached to the lateral ball valve.

ROAD TRANSPORT

The tanker has got a CE declaration of conformity. The approval certificate allows vehicle registration and opens free access to public roads.

APPLICATION

  • pumping out of liquid waste, manure, municipal wastes
  • transport and spreading onto fields and grasslands
  • crops watering, sprinkling and fertilising
  • end-stage fire extinguishing in the woods and in the fields
  • water transport to building sites and roads
  • as a water source under pressure of max 4 bars
With water gun – PN-60/4
  • length - 5 600 mm
  • width - 2 350 mm
  • height - 2 800 mm
  • unladen weight - 2 200 kg
  • gross weight - 8 200 kg
  • tank capacity - 6 000 l
  • number of wheels - 4
  • wheel track - 1 900 mm
  • tyres - 400 / 60 x 15,5
  • vertical load - 11,5 KN
  • tractor horsepower - 60 HP
  • filling time - 3 min
  • spreading spoon spilling width - 14 m
  • pumping unit - JUROP - JULIA 58
  • compressor capacity - 6 500 l / min
  • pump capacity - 3 000 l / min
  • max pressure - 4 bar
  • gun range - about 30m
Capacity PN-60/4
version

Number of axles

Wheel track Wheel setback Tyres Compressor
6 000 litres version A
standard

2

1900 160 / 205 / 6 400/60 x 15,5 JULIA 58
version B

2

1900 160 / 205 / 6

500/ 50x 17

JULIA 58

version C

2

1900 160 / 205 / 6

385/ 65 x 22,5 

retread

JULIA 58

A slurry tanker has got the following components in its standard equipment:

  • 5" suction hose 6 m long, with a suction strainer
  •  hydraulically controlled water gun
  •  spreading spoon
  •  damper - oil recuperator
  •  mudguards
  •  float valve in the upper part of the tank
  • overflow tank
  • sight-glasses in the front head
  • manometer
  • adjustable supporting foot
  • replaceable tow eye
  • single-line braking system
  • 12 V electrical system
  • hydraulic system for opening the discharge valve

A slurry tanker has got the following components in its standard equipment:

  • tyres 500/50x17 or 385/65x22.5
  • closed rear head with Ø600 mm hatch
  • tank with special paint coating
  • hydraulic or manual brass gate valves on one side or at the back of the tank
  • Ø 420 mm upper hatch, manual or hydraulic
  • ladder
  • discharge pipe with a 2" valve
  • PTO shaft
  • sprinkling distributors for backward or sideward
  • double-line braking system
  • swivel tow eye or other
Meprozet Kościan S.A. ul. Gostyńska 71 64-000 Kościan